Workboat 15m 2020

Description

Principle Dimensions
Length Overall (m) 15
Length Between Prep. (m)
Breadth (m) 5
Depth (m) 2.65
Draft (m) 1.2

Machinery & Propulsion
Total Power Output (BHP) 800
Main Engine(s) 2 x Cummins QSL 9
Main Propulsion System Twin Screw
Auxiliary engine(s) 1 X 8 KW , Sole Diesel 50 HZ
Propellers 2
Speed Maximum (knots)
Speed Cruising (knots) 14

Additional Information
Photo belongs to a sister Ship.
New building – to be delivered within 15-30 days from signing of contract.
Flag and Class to be nominated at Buyers’ choice.
The hull is to be constructed from welded marine steel plates. Steel grade.
Frame spacing: 500 mm
Double bollards are to be fifted on both sides at fore and aft, bow
Four lifting lugs are to be welded to the hull structure fore and aft for drydocking and shipping purposes
Rudders (2 off) are to be single plate with a powered hydraulic steering gear with manual emergency mode. Rudders controls located on the wheelhouse.
24VDC system consisting of four (4) battery banks

Cargo & Tank Capacities
Deck Cargo (tons) 10
Deck Area (m2) 28
Deck Load (tons/m2) 2
Fuel Tanks Capacity (m3) 2.64
Fresh Water Tanks Capacity (m3) 0.63
Bilge Tank (m3) 0.63

Anchor & Windlass
An anchor is to be fifted in chocks on the forward por side.
One unit electric anchor windlass
The following equipment will also be supplied:
Anchor: 1 piece around 30kg
Anchor chain 8mm : 30 mt

Nautical and communication equipment
Radar, GPS, Echosounder, VHF, Magnetic Compass, AIS, Horn

Accommodation equipment
WC room
Air conditions will be two units split type to serve the wheelhouse & Accom. area
1x Kitchen with sink, water heater, fridge
2x Crew room
1x Sofa with table

All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.